1 USD
=
2110 MMK
1 USD =
2110 MMK
SE ELECTRONICS X1A
ကုန်ပစ္စည်းအသုံးပြုပုံဗီဒီယို :
ကုန်ပစ္စည်းအကြောင်းအရာ :
Cardioid Condenser Microphone
The SE X1a is a fixed-cardioid, medium-diaphragm, side-address condenser microphone. It is a continuation of SE’s budget X1 line, and sister mic to the original X1, the X1t, the X1r, and so on. It is the lowest priced mic in the series; SE bills it as an entry level mic that “you’ll want to keep”. Like all SE microphones, it is manufactured at their facility in China.
The X1a has a newly-designed medium-diaphragm capsule, measuring 17mm in diameter. SE promotes the X1a as having an “extended dynamic range,” and the medium diaphragm would indicate a higher SPL handing ability than a standard 25mm (1-inch) capsule. Sure enough, the X1a can handle up to 150db by using the switchable -20db pad.
There is a bright red plastic resonator disc covering the capsule. This disc, similar to the one used in the Oktava MK-319, acts as a passive acoustic equalizer device, contouring the capsule’s frequency response.
In addition to the -20db pad, the mic has a 6db/octave 100Hz bass rolloff. Both the pad and the rolloff are accessible from switches on the front of the mic body.
As for the X1a’s construction, it has an all-metal body, gold-plated XLR connector pins, and — for plosive protection — a foam windscreen inside the grille. The mic’s circuit is manufactured using surface-mount technology.
ကုန်ပစ္စည်းအင်္ဂါရပ်များ :
X1 A microphone
swivel mic clip
mic stand thread adapter
ပါဝင်သည့်ပစ္စည်းများ :
Capsule Type: 2/3" Permanently-Biased Condenser
Directional Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Impedance: <50 Ohms
Sensitivity: 20 mV/Pa (-34 dB)
Max SPL: 130 / 150 dB (0 / 20 dB pad, (0.5% THD @ 1kHz)
Signal to Noise Ratio: 78 dB(A)
Equivalent Noise Level: 16 dB(A)
Dynamic Range: 114 / 134 dB (0 / 20 dB pad)
Low Cut Filter: 100 Hz, 6 dB/oct, switchable
Attenuation Pad: 20 dB, switchable
Connectivity: 3-pin male XLR
Power requirement: 48V phantom according to IEC 61938
Recommended Load Impedance: >1K Ohms
Current Consumption: 4.0 mA
Diameter: 58 mm (2.28 in.) x Length: 169 mm (6.65 in.)
Weight: 390 g / 13.8 oz
ကုန်ပစ္စည်းအသုံးပြုပုံဗီဒီယို :
ကုန်ပစ္စည်းအကြောင်းအရာ :
Cardioid Condenser Microphone
The SE X1a is a fixed-cardioid, medium-diaphragm, side-address condenser microphone. It is a continuation of SE’s budget X1 line, and sister mic to the original X1, the X1t, the X1r, and so on. It is the lowest priced mic in the series; SE bills it as an entry level mic that “you’ll want to keep”. Like all SE microphones, it is manufactured at their facility in China.
The X1a has a newly-designed medium-diaphragm capsule, measuring 17mm in diameter. SE promotes the X1a as having an “extended dynamic range,” and the medium diaphragm would indicate a higher SPL handing ability than a standard 25mm (1-inch) capsule. Sure enough, the X1a can handle up to 150db by using the switchable -20db pad.
There is a bright red plastic resonator disc covering the capsule. This disc, similar to the one used in the Oktava MK-319, acts as a passive acoustic equalizer device, contouring the capsule’s frequency response.
In addition to the -20db pad, the mic has a 6db/octave 100Hz bass rolloff. Both the pad and the rolloff are accessible from switches on the front of the mic body.
As for the X1a’s construction, it has an all-metal body, gold-plated XLR connector pins, and — for plosive protection — a foam windscreen inside the grille. The mic’s circuit is manufactured using surface-mount technology.
ကုန်ပစ္စည်းအင်္ဂါရပ်များ :
X1 A microphone
swivel mic clip
mic stand thread adapter
ပါဝင်သည့်ပစ္စည်းများ :
Capsule Type: 2/3" Permanently-Biased Condenser
Directional Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Impedance: <50 Ohms
Sensitivity: 20 mV/Pa (-34 dB)
Max SPL: 130 / 150 dB (0 / 20 dB pad, (0.5% THD @ 1kHz)
Signal to Noise Ratio: 78 dB(A)
Equivalent Noise Level: 16 dB(A)
Dynamic Range: 114 / 134 dB (0 / 20 dB pad)
Low Cut Filter: 100 Hz, 6 dB/oct, switchable
Attenuation Pad: 20 dB, switchable
Connectivity: 3-pin male XLR
Power requirement: 48V phantom according to IEC 61938
Recommended Load Impedance: >1K Ohms
Current Consumption: 4.0 mA
Diameter: 58 mm (2.28 in.) x Length: 169 mm (6.65 in.)
Weight: 390 g / 13.8 oz
Delivery အချက်အလက် :
တစ်နိုင်ငံလုံးပို့ဆောင်ခအသက်သာဆုံးနှင့် အရွယ်အစား (၂ပေပတ်လည်အောက်)ပစ္စည်းများ ပစ္စည်းရောက်ငွေချေနိုင်သော(CODစနစ်) ဖြင့် 3 ရက်မှ 10 ရက်အတွင်း သင့်အိမ်ရှေ့အရောက် မှာယူတဲ့ပစ္စည်းလေး ရောက်ရှိလာပါမယ်။
ဘယ်လို၀ယ်ရမလဲ :
ဘယ်လိုရောင်းရမလဲ :
ပြန်လည်ပေးပို့ခြင်းမူဝါဒ :
ပစၥည္းအမွားအယြင္းတစံုတရာ ရွိပါက ပစၥည္းေရာက္ရွိၿပီး တရက္အတြင္း အေၾကာင္းၾကား၍ ပစၥည္းျပန္လည္ပို႔ေဆာင္ေပးလွ်င္ အသစ္ျပန္လဲ ေပးမွာျဖစ္ပါတယ္။ ( ပစၥည္းအသစ္အေနအထား ယိုယြင္းပ်က္စီးေနပါက လဲလွယ္ေပးမည္ မဟုတ္ပါ ) ေငြျပန္အမ္းျခင္းသီးခံပါ။