The X1R is a passive ribbon microphone with a 2-micron aluminum ribbon.
According to sE Electronics, the mic’s cost is kept low by repurposing the body and chassis of the X1 condenser.
The X1R uses a mechanical acoustic filter in front of the ribbon (both front and back sides) to produce a high-frequency lift not commonly found in older ribbon designs. This technology is borrowed from the VR1/VR2 “Voodoo” ribbon line.
The mic has a figure-8 polar pattern, with a symmetrical response. (Although two graphs are published in the cutsheet PDF, these do not represent front and back response — rather, the lower graph is a sensitivity graph.)
Fuller response without overbearing brightness
Perfect for vocals, instruments, and even drum overheads
A flexible tool for any studio
Mic Type Bidirectional Ribbon Microphone
Polar Pattern(s) Bidirectional
Pricing & Availability
MSRP 299
Street
Availability Still Made
Physical Characteristics
Weight 500g / 17.64oz
Length
Diameter
Interface(s) 3-pin XLR male (1)
Electrical Characteristics
Impedance 200
Max SPL 135 dB
Self-noise
Transducer Characteristics
Type Ribbon
Ribbon length 0mm
Ribbon width 0mm
Ribbon thickness 2 microns
The X1R is a passive ribbon microphone with a 2-micron aluminum ribbon.
According to sE Electronics, the mic’s cost is kept low by repurposing the body and chassis of the X1 condenser.
The X1R uses a mechanical acoustic filter in front of the ribbon (both front and back sides) to produce a high-frequency lift not commonly found in older ribbon designs. This technology is borrowed from the VR1/VR2 “Voodoo” ribbon line.
The mic has a figure-8 polar pattern, with a symmetrical response. (Although two graphs are published in the cutsheet PDF, these do not represent front and back response — rather, the lower graph is a sensitivity graph.)
Fuller response without overbearing brightness
Perfect for vocals, instruments, and even drum overheads
A flexible tool for any studio
Mic Type Bidirectional Ribbon Microphone
Polar Pattern(s) Bidirectional
Pricing & Availability
MSRP 299
Street
Availability Still Made
Physical Characteristics
Weight 500g / 17.64oz
Length
Diameter
Interface(s) 3-pin XLR male (1)
Electrical Characteristics
Impedance 200
Max SPL 135 dB
Self-noise
Transducer Characteristics
Type Ribbon
Ribbon length 0mm
Ribbon width 0mm
Ribbon thickness 2 microns
တစ်နိုင်ငံလုံးပို့ဆောင်ခအသက်သာဆုံးနှင့် အရွယ်အစား (၂ပေပတ်လည်အောက်)ပစ္စည်းများ ပစ္စည်းရောက်ငွေချေနိုင်သော(CODစနစ်) ဖြင့် 3 ရက်မှ 10 ရက်အတွင်း သင့်အိမ်ရှေ့အရောက် မှာယူတဲ့ပစ္စည်းလေး ရောက်ရှိလာပါမယ်။
ပစၥည္းအမွားအယြင္းတစံုတရာ ရွိပါက ပစၥည္းေရာက္ရွိၿပီး တရက္အတြင္း အေၾကာင္းၾကား၍ ပစၥည္းျပန္လည္ပို႔ေဆာင္ေပးလွ်င္ အသစ္ျပန္လဲ ေပးမွာျဖစ္ပါတယ္။ ( ပစၥည္းအသစ္အေနအထား ယိုယြင္းပ်က္စီးေနပါက လဲလွယ္ေပးမည္ မဟုတ္ပါ ) ေငြျပန္အမ္းျခင္းသီးခံပါ။