1 USD
=
2110 MMK
1 USD =
2110 MMK
SE ELECTRONICS X1S STUDIO BUNDLE
ကုန်ပစ္စည်းအသုံးပြုပုံဗီဒီယို :
ကုန်ပစ္စည်းအကြောင်းအရာ :
sE Electronics X1 S Large-Diaphragm Cardioid Condenser Microphone
The SE Electronics X1 S is a large-diaphragm cardioid condenser microphone designed for versatile, full-range vocal and instrument recording in commercial facilities, project studios, home setups, and mobile rigs. The handcrafted gold-sputtered capsule features a pressure-gradient design for directional focus and rejection of off-axis sounds. It utilizes a gold-plated XLR 3-pin jack and requires 48V phantom power.
The metal-bodied X1 S delivers a 20 Hz to 20 kHz frequency response and a selectable 80 Hz or 160 Hz low-cut filter to reduce rumble and low-frequency buildup. A switchable -10 dB or -20 dB pad minimizes distortion when miking loud sources such as drums and amplified guitars. Even without a pad, the X1 S can handle a maximum SPL of 140 dB. It ships with a mic clip and thread adapter for easy mounting on a mic stand.
The X1 S utilizes a handcrafted condenser capsule, meticulously constructed and tuned in SE's capsule room by technicians with decades of experience
Its internal redesign allows for improved sensitivity, dramatically increased SPL handling (up to 160 dB), and a large reduction in self-noise
The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques
Selectable at either 80 Hz or 160 Hz, the two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques
The X1 S's all-metal chassis provides efficient rejection of electrical interference and noise
A gold-plated XLR connector ensures loss-free, reliable signal connection
sE Electronics RF-X Reflection Filter
The RF-X Reflection Filter from sE Electronics prevents unwanted audio ambience from contaminating your vocal tracks in untreated acoustic environments. This acoustic filter uses the same patented technology as the RF-Pro. Its lightweight body and clamp assembly makes the RF-X simple and easy to use.
The RF-X is lighter than its predecessors, but still maintains durability. It features a four-layer acoustic filter design comprising the outer composite panel itself, a wool fabric layer, an air gap layer and an inner acoustic foam layer. The air gap ensures that recordings exhibit almost no sound coloration when the RF-X filter is used.
The RF-X clamp assembly's lightweight design can be used on almost any microphone stand. It allows vertical mounting only, making it ideal for vocal recording.
sE Electronics Isolation Pack - Shock Mount and Pop Filter for Magneto, X1 & sE 2200a II Series
The sE Electronics Isolation Pack is a quick-release shock mount that is designed specifically for the Magneto, X1 Series (sE X1, X1 Vocal Pack and X1 Studio Bundle) and sE 2200a II series (sE2200a II MP and sE2200a II C) of microphones. It can be used by professionals and amateurs alike to capture vocals free of pops caused by vocal plosives and low end rumble and noise caused by unwanted vibrations.
Pop shield features metal as opposed to a fabric shield for durability
ကုန်ပစ္စည်းအင်္ဂါရပ်များ :
X1 S Cardioid Condenser Microphone
RF-X Reflexion Filter
Handcrafted Gold-Sputtered Capsule
20 Hz to 20 kHz Frequency Response
ပါဝင်သည့်ပစ္စည်းများ :
Microphone
Sound Field Mono
Operating Principle Pressure Gradient
Capsule Condenser
Diaphragm 1" / 25.40 mm
Circuitry Solid-State
Pad -10 dB
-20 dB
Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 140 dB SPL
Impedance 125 Ohms
Load Impedance 1 Kilohms
Sensitivity 30 mV/Pa
Signal-to-Noise Ratio 85 dB
Equivalent Noise Level 9 dB A-Weighted
Power
Operating Current Consumption 6 mA
Physical
Weight 15.7 oz / 445 g
Packaging Info
Package Weight 1.6 lb
Box Dimensions (LxWxH) 10.6 x 5.1 x 3.9"
SE Electronics RF-X Reflection Filter Specs
Filter Material Metal
Packaging Info
Package Weight 5.65 lb
Box Dimensions (LxWxH) 16.5 x 14 x 8.2"
SE Electronics Isolation Pack - Shock Mount And Pop Filter For Magneto, X1 & SE 2200a II Series Specs
Packaging Info
Package Weight 0.45 lb
Box Dimensions (LxWxH) 12.2 x 7 x 4.1"
ကုန်ပစ္စည်းအသုံးပြုပုံဗီဒီယို :
ကုန်ပစ္စည်းအကြောင်းအရာ :
sE Electronics X1 S Large-Diaphragm Cardioid Condenser Microphone
The SE Electronics X1 S is a large-diaphragm cardioid condenser microphone designed for versatile, full-range vocal and instrument recording in commercial facilities, project studios, home setups, and mobile rigs. The handcrafted gold-sputtered capsule features a pressure-gradient design for directional focus and rejection of off-axis sounds. It utilizes a gold-plated XLR 3-pin jack and requires 48V phantom power.
The metal-bodied X1 S delivers a 20 Hz to 20 kHz frequency response and a selectable 80 Hz or 160 Hz low-cut filter to reduce rumble and low-frequency buildup. A switchable -10 dB or -20 dB pad minimizes distortion when miking loud sources such as drums and amplified guitars. Even without a pad, the X1 S can handle a maximum SPL of 140 dB. It ships with a mic clip and thread adapter for easy mounting on a mic stand.
The X1 S utilizes a handcrafted condenser capsule, meticulously constructed and tuned in SE's capsule room by technicians with decades of experience
Its internal redesign allows for improved sensitivity, dramatically increased SPL handling (up to 160 dB), and a large reduction in self-noise
The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques
Selectable at either 80 Hz or 160 Hz, the two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques
The X1 S's all-metal chassis provides efficient rejection of electrical interference and noise
A gold-plated XLR connector ensures loss-free, reliable signal connection
sE Electronics RF-X Reflection Filter
The RF-X Reflection Filter from sE Electronics prevents unwanted audio ambience from contaminating your vocal tracks in untreated acoustic environments. This acoustic filter uses the same patented technology as the RF-Pro. Its lightweight body and clamp assembly makes the RF-X simple and easy to use.
The RF-X is lighter than its predecessors, but still maintains durability. It features a four-layer acoustic filter design comprising the outer composite panel itself, a wool fabric layer, an air gap layer and an inner acoustic foam layer. The air gap ensures that recordings exhibit almost no sound coloration when the RF-X filter is used.
The RF-X clamp assembly's lightweight design can be used on almost any microphone stand. It allows vertical mounting only, making it ideal for vocal recording.
sE Electronics Isolation Pack - Shock Mount and Pop Filter for Magneto, X1 & sE 2200a II Series
The sE Electronics Isolation Pack is a quick-release shock mount that is designed specifically for the Magneto, X1 Series (sE X1, X1 Vocal Pack and X1 Studio Bundle) and sE 2200a II series (sE2200a II MP and sE2200a II C) of microphones. It can be used by professionals and amateurs alike to capture vocals free of pops caused by vocal plosives and low end rumble and noise caused by unwanted vibrations.
Pop shield features metal as opposed to a fabric shield for durability
ကုန်ပစ္စည်းအင်္ဂါရပ်များ :
X1 S Cardioid Condenser Microphone
RF-X Reflexion Filter
Handcrafted Gold-Sputtered Capsule
20 Hz to 20 kHz Frequency Response
ပါဝင်သည့်ပစ္စည်းများ :
Microphone
Sound Field Mono
Operating Principle Pressure Gradient
Capsule Condenser
Diaphragm 1" / 25.40 mm
Circuitry Solid-State
Pad -10 dB
-20 dB
Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 140 dB SPL
Impedance 125 Ohms
Load Impedance 1 Kilohms
Sensitivity 30 mV/Pa
Signal-to-Noise Ratio 85 dB
Equivalent Noise Level 9 dB A-Weighted
Power
Operating Current Consumption 6 mA
Physical
Weight 15.7 oz / 445 g
Packaging Info
Package Weight 1.6 lb
Box Dimensions (LxWxH) 10.6 x 5.1 x 3.9"
SE Electronics RF-X Reflection Filter Specs
Filter Material Metal
Packaging Info
Package Weight 5.65 lb
Box Dimensions (LxWxH) 16.5 x 14 x 8.2"
SE Electronics Isolation Pack - Shock Mount And Pop Filter For Magneto, X1 & SE 2200a II Series Specs
Packaging Info
Package Weight 0.45 lb
Box Dimensions (LxWxH) 12.2 x 7 x 4.1"
Delivery အချက်အလက် :
တစ်နိုင်ငံလုံးပို့ဆောင်ခအသက်သာဆုံးနှင့် အရွယ်အစား (၂ပေပတ်လည်အောက်)ပစ္စည်းများ ပစ္စည်းရောက်ငွေချေနိုင်သော(CODစနစ်) ဖြင့် 3 ရက်မှ 10 ရက်အတွင်း သင့်အိမ်ရှေ့အရောက် မှာယူတဲ့ပစ္စည်းလေး ရောက်ရှိလာပါမယ်။
ဘယ်လို၀ယ်ရမလဲ :
ဘယ်လိုရောင်းရမလဲ :
ပြန်လည်ပေးပို့ခြင်းမူဝါဒ :
ပစၥည္းအမွားအယြင္းတစံုတရာ ရွိပါက ပစၥည္းေရာက္ရွိၿပီး တရက္အတြင္း အေၾကာင္းၾကား၍ ပစၥည္းျပန္လည္ပို႔ေဆာင္ေပးလွ်င္ အသစ္ျပန္လဲ ေပးမွာျဖစ္ပါတယ္။ ( ပစၥည္းအသစ္အေနအထား ယိုယြင္းပ်က္စီးေနပါက လဲလွယ္ေပးမည္ မဟုတ္ပါ ) ေငြျပန္အမ္းျခင္းသီးခံပါ။