1 USD
=
2110 MMK
1 USD =
2110 MMK
SE ELECTRONICS DM1
ကုန်ပစ္စည်းအသုံးပြုပုံဗီဒီယို :
ကုန်ပစ္စည်းအကြောင်းအရာ :
The DM1 Dynamite Active Inline Microphone Preamplifier from sE Electronics is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). It can be used to deliver a robust 28 dB of gain to boost the audio signal of a passive mic, which improves the level to a preamplifier without adding noise or coloration.
With a sophisticated class-A design and high-grade FETs, the DM1 has a low self-noise. It is built with a dedicated output buffer amplifier allowing it to drive long cable runs and reduce RF interference, buzz, and hum. Additionally, the DM1 Dynamite Active Inline Microphone Preamplifier offers a roadworthy, slim, all-metal design ensuring reliable operation for on-stage applications in difficult environments.
ကုန်ပစ္စည်းအင်္ဂါရပ်များ :
For Passive Ribbon or Dynamic Microphone
Provides 28 dB of Gain
Class-A Design
Low Self-Noise
ပါဝင်သည့်ပစ္စည်းများ :
General
In-Line Accessory Type Pre-Amplifier
Gain +28 dB (1-Kilohm Load)
Connectivity
I/O 1 x XLR 3-Pin Female Input
1 x XLR 3-Pin Male Output
Performance
Frequency Response 10 Hz to 120 kHz -0.3 dB
Impedance 135 Ohms
Load Impedance 1 Kilohms (Minimum)
Max Output Level +8.3 dBV (0.5% THD)
Noise Output Noise:
30 dBm (JIS-A)
Power
Operating Voltage 48 V (Phantom Power)
Operating Current Consumption 3.0 mA
Physical
Dimensions 0.75 x 3.76" / 1.91 x 9.55 cm
Weight 2.8 oz / 79.9 g
Packaging Info
Package Weight 0.22 lb
Box Dimensions (LxWxH) 14.4 x 2.85 x 1.25"
ကုန်ပစ္စည်းအသုံးပြုပုံဗီဒီယို :
ကုန်ပစ္စည်းအကြောင်းအရာ :
The DM1 Dynamite Active Inline Microphone Preamplifier from sE Electronics is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). It can be used to deliver a robust 28 dB of gain to boost the audio signal of a passive mic, which improves the level to a preamplifier without adding noise or coloration.
With a sophisticated class-A design and high-grade FETs, the DM1 has a low self-noise. It is built with a dedicated output buffer amplifier allowing it to drive long cable runs and reduce RF interference, buzz, and hum. Additionally, the DM1 Dynamite Active Inline Microphone Preamplifier offers a roadworthy, slim, all-metal design ensuring reliable operation for on-stage applications in difficult environments.
ကုန်ပစ္စည်းအင်္ဂါရပ်များ :
For Passive Ribbon or Dynamic Microphone
Provides 28 dB of Gain
Class-A Design
Low Self-Noise
ပါဝင်သည့်ပစ္စည်းများ :
General
In-Line Accessory Type Pre-Amplifier
Gain +28 dB (1-Kilohm Load)
Connectivity
I/O 1 x XLR 3-Pin Female Input
1 x XLR 3-Pin Male Output
Performance
Frequency Response 10 Hz to 120 kHz -0.3 dB
Impedance 135 Ohms
Load Impedance 1 Kilohms (Minimum)
Max Output Level +8.3 dBV (0.5% THD)
Noise Output Noise:
30 dBm (JIS-A)
Power
Operating Voltage 48 V (Phantom Power)
Operating Current Consumption 3.0 mA
Physical
Dimensions 0.75 x 3.76" / 1.91 x 9.55 cm
Weight 2.8 oz / 79.9 g
Packaging Info
Package Weight 0.22 lb
Box Dimensions (LxWxH) 14.4 x 2.85 x 1.25"
Delivery အချက်အလက် :
တစ်နိုင်ငံလုံးပို့ဆောင်ခအသက်သာဆုံးနှင့် အရွယ်အစား (၂ပေပတ်လည်အောက်)ပစ္စည်းများ ပစ္စည်းရောက်ငွေချေနိုင်သော(CODစနစ်) ဖြင့် 3 ရက်မှ 10 ရက်အတွင်း သင့်အိမ်ရှေ့အရောက် မှာယူတဲ့ပစ္စည်းလေး ရောက်ရှိလာပါမယ်။
ဘယ်လို၀ယ်ရမလဲ :
ဘယ်လိုရောင်းရမလဲ :
ပြန်လည်ပေးပို့ခြင်းမူဝါဒ :
ပစၥည္းအမွားအယြင္းတစံုတရာ ရွိပါက ပစၥည္းေရာက္ရွိၿပီး တရက္အတြင္း အေၾကာင္းၾကား၍ ပစၥည္းျပန္လည္ပို႔ေဆာင္ေပးလွ်င္ အသစ္ျပန္လဲ ေပးမွာျဖစ္ပါတယ္။ ( ပစၥည္းအသစ္အေနအထား ယိုယြင္းပ်က္စီးေနပါက လဲလွယ္ေပးမည္ မဟုတ္ပါ ) ေငြျပန္အမ္းျခင္းသီးခံပါ။